There is a new addition to the free downloads of EeZeBilt plans - a 32" Warsaw Pact OSA-1 Missile boat. Plans, instructions and a short build log...
As Jan says, the original EeZeBilts were never designed for Radio Control, and even the big ones are a little small. One trick might be to print...
Here is a picture of the idea. Make the item out of brass or steel. Bend and solder it to shape. Mount a servo in the 'motor' area, and attach the...
I am not sure what you will do for a motor. You need two, which makes the problem harder! Small plastic outboard motors used to be cheap to buy,...
The EeZeBilt skins were originally designed to be made out of 1/16 inch balsa - about 1.7mm. This makes it easy for a child to cut, trim and bend....
Check that you haven't got something touching a rotating part. Sometimes you can get a wire being pressed down onto the motor or connector when...
Should I replace the frame or should I just reinforce the old one? It is important to support the prop-tube as much as possible, but you don't...
You need a big propeller with this motor. I think that a lot of the noise is the motor overspeeding with very little load on it. I used a 32mm...
The boat is looking very good in the water, but I think we can make some slight improvements... Is that able to get up to full speed on your...
Here is where I think the image should go. Use a photo editor to set the grey background to the correct colour for your boat: IMG_2866 door Dodgy...
I use OPERA, which does not translate so well - so I have to take each line and translate it in a separate tab - takes a long time...:mad:
Is that better? Sorry about the duplicate...
Oh dear. And not knowing any Dutch makes it very hard to find out how to make them public. Can anyone advise?
You can, of course, buy expensive flags printed on silk. But EeZeBilts are meant to be cheap and simple! So I print out flags on an inkjet - you...
It's good to see a bit of colour on a PT-Boat. I put a few flags on the plans for this reason. The 'air-recognition' patch is not unusual - some...
I see that you have done the "Moonbeam McSwine", which had action off the coast of Italy and France in 1944-45. There were hundreds of PT-Boats,...
Before I buy the motor. Did you use any cooling on it or did it stay cool enough without? Sorry I didn't notice this question before! I ran my...
The boat is looking good, and coming together quickly. That's what EeZebilts are all about! Some of the painted edges are a bit rough. Do you...
On the prototype I used a 32 mm prop, and that went quite fast with the EMax CF2822 on 7.2V. If you can fit a 35 mm there should be no problem...
Scheid namen met een komma.
